Tony Davies demonstrates how to replace an electro-hydraulic autopilot pump
Tony Davies
Tips for buying a used boat trailer
Tony Davies advises on what to look out for when buying a used boat trailer
How to repair a heavy-duty zip on a bow dodger
Tony Davies demonstrates how you can restore a broken heavy-duty zip to full working condition
How to service a marine engine cooling system
Is your boat's engine beginning to run hotter than normal? It may be time to service the cooling system, suggests Tony Davies
Replacing a saildrive gaiter: step by step
After seven years of regular use, a saildrive gaiter should be changed before it deteriorates to let water through the hull, warns Tony Davies
Making clamps from copper pipe: step by step
Used copper piping can be repurposed to make pipe and cable clamps, explains Tony Davies
How to fit coaxial plugs and sockets
Tony Davies shows how to fit coaxial plugs and sockets to make a reliable VHF cable joint
How do you close the gap between the rudder and propeller?
Practical Boat Owner reader David Blackborow is trying to find out the best way to close the gap between the rudder and propeller on his boat
Will my old propeller work with a new engine?
Jerry Armitage is planning to replace his boat engine, but will the old propeller work? PBO expert Tony Davies has the answer
Diesel Dipper review: Can this fuel tank cleaner help avoid breakdowns?
For clean fuel you need a clean tank, Tony Davies tries out the Diesel Dipper from Marine 16, which promises to provide a solution
Are folding or feathering propellers worth the extra cost? Ask the experts
Nicko Williams asks: “I wonder what your views are on folding versus feathering boat propellers. “My Jeanneau 379 carries a three-bladed prop which does its job perfectly satisfactorily but it…
Is it worthwhile fitting an automatic bilge pump? Ask the experts
James Brooking asks: “I have a 25ft bilge keel yacht, it is fitted with a large Whale pump in the cockpit to service the engine compartment and cabin. “I also…
Is expanding foam suitable for plugging moisture traps? Ask the experts
Allen Brunton asks: “Our 1983 Sigma 41 has some spaces which trap water and which would be very difficult to drill limber holes into. They’re awkwardly shaped, often irregular and…